Featured Products

Specifications: Frequency: 433.92MHz Numbre of channels: 2 Power Supply: 1 A23 Battery, 12V Transmission consumption: 18 mA Availabe codes: 18 billionth of illions Antenna: Built-in Oscillator type: SAW Colour: Black Operating temperature: -20°C to +70°C Kit Includes: 2 x Genuine Beninca TO.GO2 Remote Transmitter

Features: Solid steel bar 1m length Approx. 4mm thick Suitable for Domestic, Industrial or Commercial use Automatic swing gates sliding gates and garage doors Kit Includes: 1 x 1m U-Groove Steel Track

Features: Cast Iron construction Does not need any lubrication and can work in environments contaminated with oil, dirt, sand, moisture and grease Rubber spider element absorbs shock loading

Features: Designed to deliver optimum value and reliability Produces with careful selection of steel raw materails, heat treatment processing, precised and efficient forging Turning and grinding processes all managed at standards to produce cost-effectie inner and outer races with deep groove raceways These dependable races are then matched with steel balls with retainers to achieve the right clearance/noise level requirements Lubrications and seals are also thoroughly chosen to optimize service life and reduce maintenance cost of the bearings

Includes (Choose from drop down menu): 26mm x 1.5mm O-Ring Seal 50pcs OR 26mm x 2mm O-Ring Seal 25pcs OR 26mm x 3mm O-Ring Seal 25pcs OR 26mm x 4mm O-Ring Seal 10pcs

Specifications: CC/Rev: 79.2 Rotor Width L1 (mm): 10.67 Speed Max Cont (RPM): 755 Flow Max Con (LPM): 60 Pressure Drop Max Cont (Bar): 140 Inlet Pressure Max Cont (Bar): 175 Torque Max Cont (Nm): 151 Weight (kg): 6.4 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Features: 14" Diamter Blade Solid steel construction 1" (25.4mm) Bore 4mm Blade Thickness Can be used with most Concrete Cutting Saws

Three Phase 0.25kW 1/3HP 19rpm Type 50 Electric Motor & Worm Gearbox Drive i150 Three Phase 0.25kW 1/3HP 19rpm Type 50 Electric Motor & Worm Gearbox Drive i150 Specifications: Power: 0.25Kw (0.33HP) Voltage: 240V/415V Three Phase 50Hz Output Speed: 19.1rpm  Max. Output torque: 113Nm Output Shaft size: 20mm (Hollow Output Shaft) Gearbox size: Type 50 Reduction: 150:1 Service factor: 1.2 f.s. Duty: S1 Features: IEC Standard IP55 Protection Rating Epoxy Painted - Silver Colour Cast Aluminium construction with top mounted terminal box Class F insulation High Efficiency Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration  Dimensions: Suitable Applications: Hoists / Winches Compressors Conveyor Drives Pump Drives Automation Devices Food / Pharmacy Packaging Pulley drives Fans Food Processing Optional Accessories (Available on request): Output flanges Output shafts Torque Arms Couplings Pulleys Chain Drives We also have both Single and Three Phase electric motors between 0.18Kw to 315Kw in 2, 4, 6 and 8 pole.

Specifications: Power: 1.5kW (2HP) Voltage: 415V Three Phase 50Hz Speed: 6 Pole (940rpm) Shaft size: 28mm Mounting: B3 Foot Weight: 22kg Features: IEC Standard IP55 Protection Rating Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Specifications: Shaft diameter: 1/2" Unit diameter: UCF201 Dimensions: 86 x 86mm Hole span: 64 x 64mm Hole size: 12mm Weight: 0.67kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditions, and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 70mm x 2mm O-Ring Seal 5pcs OR 70mm x 3mm O-Ring Seal 5pcs OR 70mm x 4mm O-Ring Seal 5pcs OR 70mm x 5mm O-Ring Seal 5pcs OR 70mm x 6mm O-Ring Seal 5pcs Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

BFT COMPACTA A20-180 Model: P111782   Specifications: Interconnectivity: no Supply voltage: 12 - 33Vac / 15 - 35Vdc Nominal Range: 20 m Horizontal Adjustment: 180 ° Degree of protection (IP): 44   Kit Contains: 1 x BFT COMPACTA A20-180 (Pair)

Features: 7" TFT HD Monitor (1440 x 234 Pixel) Full Mirror-polished panel Touch sensor buttons with Blue backlit for Talk, Alarm, Monitor, Unlock Wall-mounted Monitor 1.0MP 3.6mm lens RFID Access control supported (Doors can be accessed/relesed throght proximity cards) Easy to install, with adaper and cables Kit Includes: 1 x Internal display monitor unit 1 x External camera unit Installation accessories User manual

Specifications: CC/Rev: 410.9 Rotor Width L1 (mm): 51 Speed Max Cont (RPM): 305 Flow Max Cont (LPM): 125 Pressure Drop Max Cont (Bar): 250 Inlet Pressure Max Cont (Bar): 270 Torque Max Cont (Nm): 1470 Weight (kg): 30 Case: 1/4" BSPP Shaft sizes available: 40mm Straight keyed (Standard) 1.1/2" 17T Splined 50mm 1:10 Tapered

Features: 4 Channels Coding: Rolling Code programming with receiver 433.92 MHz Frequency Battery Typer: CR2032 Replaces: Ditec BIXLG2, BIXLG4

Features: Solid Steel material Fully galvanised to resist from wear Suitable for dual or single swing gates Kit Includes: 1 x Gate Stops for Dual Swing Gates

Specifications: Power: 3kW (4HP) Voltage: 240V Single Phase 50Hz Output Speed: 140rpm Max. Output Torque: 180Nm Output Shaft Size: 28mm (Hollow Output Shaft) Gearbox size: Type 75 Reduction: 10:1 Service factor: 1.1 f.s. Features: IEC Standard IP55 Protection Raing Capacitor start/Capacitor run Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration  

Specifications: CC/Rev: 495 Rotor Width L1 (mm): 66.63 Speed Max Cont (RPM): 120 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 60 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 390 Weight (kg): 9.4 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Features: 3 x Sealed bearings No greasing required Easy adjustments Finish: Zinc Fixing Method: Weld Gap Variance: 64-76mm Steeel Bracket Steel Body Max gate weight: 680kg Near frictionless movement

Features: Easy to install Red on/off switch Highly durable Automatically controls the pressure of the air compressor Connection air reservoir fitting 1/2 thread 20mm diameter, requires own assembly Specifications: Material: Metal & Plastic Maximum voltage: 240V Maximum Current: 20A Pressure Range: 90-120psi Male Thread Diameter: 20mm (1/2" NPT) Valve Male Thread Diameter: 13mm (1/4" NPT) 41mm Dia Gauges: 0 to 180psi