Featured Products

Features: Designed for applications with relatively high demand torque Recess machined centre to prevent distortion of taper Constructed from low carbon steel Suitable for fan rotors and plate sprockets Extended flange provides convenient means for welding devices (must be firmly fastened to a shaft)  

Features: Suits essentially all pneumatic systems; example: air compressors, air motor systems PT sized standard thread Fitting type: "T", Tee Available in Ø4mm, Ø6mm, Ø8mm, Ø10mm, Ø12mm Thread sizes from 1/8" to 1/2" External Thread High quality 316 Stainless Steel

Specifications: Power: 0.18kW (0.25HP) Voltage: 240V Single Phase 50Hz Amperage/Current: Approx. 1.43A Speed: 4 Pole (1400rpm) Shaft size: 11mm Duty: S1 Mounting: B14 Flange Weight: 6kg Features: IEC Standard IP55 Protection Rating Cast Aluminium construction with top mounting terminal box Totally Enclosed Fan cooled High quality bearings, grease packed for life Low noise and vibration

Features: Cast iron construction Taper-lock bush makes removal and installation easier Kit Includes: 1 x SPZ-2 Groove Pulley with taperlock bush to suit

Specifications: Cast Iron construction Max bore: 43mm Min bore: 12mm Max rpm: 4500rpm Coupling rating: 226Nm

Specifications: See below for the spec-sheet of the corresponding unit If you are unable to read it, send us a message or call us (02) 9607 4300 Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners, and many more Self-aligning feature to allow for the inner and outer rings to have a specific angle Solid construction

24V DC Hydraulic Power Pack Power Unit for Tipper or Tail Gate 10L      24V Hydraulic Power Pack to suit most single acting applications. Manufactured to the highest industrial grade quality.  This power pack comes complete with the following features: 24V DC Power Unit 2.5cc/rev Hydraulic Pump (other cc/rev like 2.0 and 3.0 available) 1.8kW 24V DC Electric Motor with Start Solenoid Heavy Duty Steel End Block 2 Button Pendant with connector and 3m cable High Strength Plastic Pendant Holster 24V DC Lowering valve and coil Max Pressure: 210 bar 3/8" BSP Port size 10L Steel tank with Filler and Breather Adjustable relief valve set at 180 bar Max flow achievable is 5L/min @ 180 bar Horizontal mounting 6 Month Warranty

Rigid Couplings are used in situations where shaft alignment is essential. A misaligned coupling can cause damage and downtime. When properly fitted this torsionally rigid coupling helps prevent any such event. Rigid Couplings are Taper Lock ready and available in a range of sizes to accommodate almost any shaft size. Rigid Couplings consist of 2 flanges, available in internal and external entry (H & F). This gives two possible coupling assemblies HF and FF. When connecting horizontal shafts, choose the most convenient method. When connecting vertical shafts use assembly FF only. Please message us with the two sizes you require from the list of taper lock sizes below.  11mm 12mm 14mm 16mm 18mm 19mm 20mm 22mm 24mm 25mm 28mm 30mm 32mm 1/2"Inch 5/8"Inch 3/4"Inch 7/8"Inch 1"Inch 1-1/8"Inch 1-1/4"Inch

Specifications: CC/Rev: 724.3 Rotor Width L1 (mm): 70 Speed Max Cont (RPM): 170 Flow Max Cont (LPM): 125 Pressure Drop Max Cont (Bar): 160 Inlet Pressure Max Cont (Bar): 270 Torque Max Cont (Nm): 1600 Weight (kg): 32 Case: 1/4" BSPP Shaft sizes available: 40mm Straight keyed (Standard) 1.1/2" 17T Splined 50mm 1:10 Tapered

Specifications: Shaft diameter: 35mm Unit number: UCP207 Dimensions: 167 x 94mm Hole span: 127mm Hole size: 17 x 21mm Weight: 1.73kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

Features: LED indicators Durable metal and plastic construction Sliding button cover Ergonomic design Batteries and instructions included Interchangeable with: ATA PTX4 Compatible with: GDO-2v5, 2v6,2v7 GDO-4v3, 4v4, 4v5, 4v6 GDO-6, 6v1 GDO-7, 7v1 GDO-8, 8v1, 8v2 GDO-9, 9v1 Securalift Easyroller

Specifications: Voltage: 415V 50Hz Power: 10HP Air Tank: 230L Working Pressure: 12.5 Bar (181 PSI) Displacement: 900 L/min (31.7 cfm) Speed: 860 rpm Weight: 250 Kg Dimensions: 154 x 57 x 115 cm

Idler Sprocket 3/4” Inch Pitch 15 Tooth 1/2” Inch ID   This listing is for one Idler Sprocket 3/4” Inch Pitch 15 Tooth 1/2” Inch ID. Includes: 1 x Idler Sprocket 3/4” Inch Pitch 15 Tooth 1/2” Inch ID

Features: Oil tempered steel for greater strength Galvanised coating by imersion Black enamel coating for extra protection from rust

Features: High quality chrome vanadium steel screwdriver bits Kit Includes: 37 Chrome vanadium steel screwdriver bits1 6PC Slotted 10PC Phillips 2PC Poi 6PC Torx 4PC Square 9PC Hex PC 1/4" Ratcheting Screwdriver handle

24V DC Hydraulic Motor S9046-1 Model 4000W 3200rpm Specifications Power: 4000W Voltage: 24V Speed: 3200rpm with tang shaft Rotation: Clockwise Torque: 14N.m Protection Level: IP12 Insulation Level: F Teeth: 2 Duty Cycle: 13 min-28%ED Weight: 15kg   Applications Aerial Work Platforms Scissor Lifts

Specifications: CC/Rev: 40 Rotor Width L1 (mm): 7.4 Speed Max Cont (RPM): 1500 Flow max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 120 Inlet Pressure Max Cont (Bar); 175 Torque Max Cont (Nm): 62 Weight (kg): 6.2 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 135mm x 3mm O-Ring Seal 1pc OR 135mm x 4mm O-Ring Seal 1pc OR 135mm x 5mm O-Ring Seal 1pc OR 135mm x 6mm O-Ring Seal 1pc Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Specifications: Power: 1.1kW (1.5HP) Voltage: 240V Single Phase 50Hz Output Speed: 140 rpm Max. Output torque: 65Nm Shaft Size: 25mm (Hollow Output Shaft) Gearbox size: Type 63 Reduction 10:1  Service factor: 2.0 f.s. Features: IEC Standard IP55 Protection Rating Class F insulation Low noise and vibration