Featured Products

Specifications: Bearing unit number: FL210-32 Shaft diameter: 2" Dimensions: 7-3/4" x 4-17/32" (~196.85 x 115.094mm) Hole span: 6-3/16" (~157.1625mm) Hole size: 3/4" (~19.05mm) Bolt size: 5/8" Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

Specifications: Type: 90 Reduction: 1:10 Input Shaft size: 19mm, 24mm or 28mm Output shaft size: 35mm Features: IEC Standard Universal Mounting Design Rigid and precise monolithic casing in cast aluminium Cylindrical worm shaft with ground and super-finished involute profile Forced ventilation High quality bearings Low noise and vibration

Specifications: Power: 100W Input: 100-277V AC 50/60Hz (Max 1.1A) CCT: 5000K Beam angle: 120° Protection Class: IP67

Features: Highly advanecd catching system Loackable on both sides Key provided Fast & easy installation Made from stainless steel and fiber-reinforced polymers Non-rusting Cycle test Vertical and horizontal adjustments

Features: Cast Iron construction Suitable for Jaw Coupling of 100mm Kit Includes: 1 x Jaw Coupling Spacer 100mm

Features: Cast Iron construction Does not need any lubrication and can work in environments contaminated with oil, dirt, sand, moisture and grease Rubber spider element absorbs shock loading

Specifications: Type: 65 Reduction: 1:10 Input Flange: B5 80 Input Shaft Size: 19mm Output Shaft Size: 28mm Features: IEC Standard Universal Mounting Design Rigid and precise monolithic casing in cast aluminium Cylindrical worm shaft with ground and super-finished involute profile Forced ventilation High qualtiy bearings Low noise and vibration

Features: Cast Iron construction Suitable for Jaw Coupling of 140mm Kit includes: 1 x Jaw Coupling Spacer 140mm

Specifications: Type: 75 Reduction: 1:10 Input Flange:B5 71 Input Shaft Size: 14mm Output Shaft Size: 28mm Features: IEC Standard Universl Mounting Design Rigid and precise monolithic casing in cast aluminium Cylindrical worm shaft with ground and super-finished involute profile Forced ventilation High quality bearings Low noise and vibration

Specifications: Power: 4kW (5.5HP) Voltage: 415V Three Phase 50Hz Frame size: 112 Speed range: 200-1000rpm Shaft size: 28mm Features: IEC Standard IP55 Protection Rating Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Specifications: Power: 7.5kW (10HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole (1400rpm) Shaft size: 38mm Mounting: B14 Flange Weight: 58kg Features: IEC Standard IP55 Protection Rating Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearing, grease packed for life Low noise and vibration

Specifications: Power: 5.5kW (7.5HP) Voltage: 240/415V Three Phaes 50Hz Amperage/Current: 11A Speed: 2 Pole (2800rpm) Shaft size: 38mm Duty: S1 Mounting: B5 Flange Weight: 49.5kg Features: IEC Standard IP55 Protection Rating Capacitor Start/Capacitor Run Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

12V DC Hydraulic Power Pack Power Unit for Tipper or Tail Gate 10L Tank      12 V Hydraulic Power Pack to suit most single acting applications. Manufactured to the highest industrial grade quality.  This power pack comes complete with the following features: 12V DC Power Unit 2.5cc/rev Hydraulic Pump (other cc/rev like 2.0 and 3.0 available) 1.8kW 12V DC Electric Motor with Start Solenoid Heavy Duty Steel End Block 2 Button Pendant with connector and 3m cable High Strength Plastic Pendant Holster 12V DC Lowering valve and coil Max Pressure: 210 bar 3/8" BSP Port size 10L Steel tank with Filler and Breather Adjustable relief valve set at 180 bar Max flow achievable is 5L/min @ 180 bar Horizontal mounting 6 Month Warranty

Specifications: Power: 1.1kW (1.5HP) Voltage: 240V Single Phase 50Hz Amperage/Current: Approx. 7.02A Speed: 2 Pole (2800rpm) Shaft size: 19mm Frame size: 80 Duty: S1 Weight: 12kg Features: IEC Standard IP55 Protection Rating Capacitor start/Capacitor run Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration Comes with rev switch

Features Viton Construction Twin Lip Design Resistance to Chemicals and Petroleum Liquids What's Included 1 x Oil Seal of Selected Size PLEASE SELECT SIZE FROM DROP DOWN BAR BELOW

Specifications: CC/Rev: 123.8 Rotor Width L1 (mm): 16.67 Speed Max Cont (RPM): 485 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 125 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 202 Weight (kg): 6.1 Case: 7/16" UNF Shaft sizes available: 1" Straight Woodruff keyed (Standard) 1" SAE 6B Splined 7/8" 13T Splined 1" Straight Cross Hole (8mm hole) 1" 1:8 Tapered

Features: Oil tempered steel for greater strength Galvanised coating by imersion Black enamel coating for extra protection from rust

Features: Interchangeable with Bibby and Falk 2060 Grid Coupling Specifications: Cast Iron construction Max bore: 55mm Min bore: 19mm Max rpm: 4350rpm Coupling rating: 621Nm

Specifications: CC/Rev: 99 Rotor Width L1 (mm): 13.33 Speed Max Cont (RPM): 605 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 140 Inlet Pressure Max Cont (Bar): 175 Torque Max Cont (Nm): 193 Weight (kg): 6.6 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Includes (Choose from drop down menu): 120mm x 3mm O-Ring Seal 10pcs OR 120mm x 4mm O-Ring Seal 10pcs OR 120mm x 5mm O-Ring Seal 10pcs OR 120mm x 6mm O-Ring Seal 10pcs