Featured Products

Features: Induction hardened teeth which improves sprocket resistance to wear Engineered in accordance with the stringent ISO 9000 standards Includes: 1 x Pilot Bore Stainless Steel Sprocket

Specification: Type L-SC Duplex

Pilot Bore Sprockets 25-1 American Standard high quality steel pilot bore sprockets. Complete with induction hardened teeth, thus improving the sprockets resistance to wear and increasing the sprockets working life. We can bore key to any size, additional charge. All sprockets are engineered in accordance with the stringent ISO 9000 standards. Includes: 1 x Pilot Bore Sprocket 25-1

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 135mm x 3mm O-Ring Seal 1pc OR 135mm x 4mm O-Ring Seal 1pc OR 135mm x 5mm O-Ring Seal 1pc OR 135mm x 6mm O-Ring Seal 1pc Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Specifications: CC/Rev: 623.6 Rotor Width L1 (mm): 84 Speed Max Cont (RPM): 95 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 55 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 440 Weight (kg): 10.1 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Features: Interchangeable with Bibby and Falk 2100 Grid Coupling Specifications: Cast Iron construction Max bore: 107mm Min bore: 41mm Max rpm: 2440rpm Coupling rating: 5706Nm

Features: Designed to deliver optimum value and reliability Produced with careful selection of steel raw materials, heat treatment processing, precised and efficient forging Turning and grinding processes all managed at standards to produce cost-effective inner and outer races with deep groove raceway These dependable races are then matched with steel balls and retainers to achieve the right clearance/noise level requirements Lubrications and seals are also thoroughly chosen to optimize service life and reduce maintenance cost of the bearings

Features: 10" Monitor Touch sensor buttons with blue backlit for Talk, Alarm, Monitor and Unlock Wall-mounted Monitor Easy to install with adapter and cables Unlock up to 2 doors (one gate and one other front door) Connect up to 2 alarm systems to trigger recording of cameras Connect up to 2 external cameras SD card expandable storage IP 56 Protection rating Connect up to 4 internal monitors in one house Motion detection camera doorbells (requires SD Card) NEW message recording feature

Features: Solid steel bar Fully galvanised 1m length Approx. 3mm thick Suitable for Domestic, Industrial or Commercial use Automatic swing gates, sliding gates and garage doors Kit Includes: 1 x 1m U-Groove Steel Track

Features: Cast Iron construction Taper-lock bush makes removal and installation easier Kit Includes: 1 x Pulley with taperlock bush to suit

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 120mm x 3mm O-Ring Seal 1pc OR 120mm x 4mm O-Ring Seal 1pc OR 120mm x 5mm O-Ring Seal 1pc OR 120mm x 6mm O-Ring Seal 1pc Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Specifications Power: 0.55kW (0.75HP) Voltage: 415V Three Phase 50Hz Amperage/Current: 1.34A Speed: 2 Pole (2800rpm) Shaft size: 14mm Mounting: B5 Flange Features: IEC Standard Ex Standard IP55 Protection Rating Cast iron construction with top mounted terminal box, high resistance to impact High quality bearings, grease packed for life Low noise and vibration

Specifications: CC/Rev: 201 Rotor Width L1 (mm): 21.5 Speed Max Cont (RPM): 620 Flow Max Cont (LPM): 125 Pressure Drop Max Cont (Bar): 200 Inlet Pressure Max Cont (Bar): 210 Torque Max Cont (Nm): 950 Weight (kg): 21.5 Case: 9/16" UNF Shaft sizes available: 1.1/2" Straight keyed (Standard) 40mm Straight keyed 1.1/2" 17T Splined 45mm 1:8 Tapered

Specification: Type L-AR Duplex

Features: Designed to deliver optimum value and reliability Produced with careful selection of steel raw materials, heat treatment processing, precised and efficient forging Turning and grinding processes all managed at standards to produced cost-effective inner and outer races with deep groove raceways These dependable races are then matched with steel balls and retainers to achieve the right clearance/noise level requirements Lubrications and seals are also thoroughly chosen to optimize service life and reduce maintenance cost of the bearings

Specifications: Single Leaf Max Width: 3.5m (3m with 180° optional kit, 2.5m with 140° optional kit) Single Leaf Max Weight: 500kg Reduction Ratio: 1:1418 Power Supply: 24 Vdc Power Consumption: 70 W Current Consumption: 3A Max Torque: 300Nm Thrust Force: 770N Max Angular Speed: 6 °/sec Type and Frequency of Use at 20°C: 100% Max Opening Angle Door: 110° (140° and 180° with optional kit) Operating Temperature: -20°C to +55°C Weight: 12Kg (14Kg with casing) Casing Dimensions: 430(L) x 307.5(D) x 214(H) (mm)

Specifications: Bearing unit number: FL207-23 Shaft diameter: 1-7/16" Dimensions: 6-11/32" x 3-17/32" (~161.13125 x 89.694mm) Hole span: 5-1/8" (~130.175mm) Hole size: 5/8" (~15.875mm) Bolt size: 1/2" Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners  and many more Self-aligning features that allows the inner and outer rings to have a specific angle Solid construction

Features: Cast iron construction Taper-lock bush makes removal and installation easier Kit Includes: 1 x Pulley with taperlock bush to suit

  Specifications:   Power: 2.2Kw (3HP) Voltage: 415V Three Phase 50Hz Speed: 6 Pole Shaft size: 28mm Duty: S1 continuous

  Specifications:   Power: 0.75Kw (1HP) Voltage: 415V Three Phase 50Hz Speed: 2 Pole Shaft size: 19mm Duty: S1 continuous