Featured Products

Includes (Choose from drop down menu): 96mm x 2mm O-Ring Seal 10pcs OR 96mm x 4mm O-Ring Seal 10pcs OR 96mm x 5mm O-Ring Seal 10pcs

Features: Designed to deliver optimum value and reliability Produced with careful selection of steel raw materials, heat treatment processing, precised and efficient forging Turning and grinding processes all managed at standards to produce cost-effective inner and outer races with deep groove raceways These dependable races are then matched with steel balls and retainers to achieve the right clearance/noise level requirements Lubrications and seals are also thoroughly chosen to optimize service life and reduce maintenance cost of the bearings

Features: Solid steel bar 1m length Approx. 4mm thick Suitable for Domestic, Industrial or Commercial use Automatic swing gates, sliding gates and garage doors Kit Includes: 1 x 1m U-Groove Steel Track

Specification: Type L-SC Simplex

  Specifications:   Power: 2.2Kw (3HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole Shaft size: 28mm Duty: S1 continuous

Main Features: Displacements from 14.89cm?3;/ revolution to 86.87cm?3;/ revolution Maximum pressures up to 320 bar Flange: Ø50.8 - Standard European Standard factory External Drainage Rotation speeds up to 3000 rpm Configurations with inlet and outlet in the body, flange and cover Shaft: Tapered 1:8 Woodruff Key

  Specifications:   Power: 3Kw (4HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole Shaft size: 28mm Duty: S1 continuous

Features: Cast aluminium construction Capable of being matched with a vast range of gearboxes Suitable for modular assembling of flanges, feet and torque arms Increased torque with a number os speed Dial indicator to allow for fine adjustments in speed

Specifications: Voltage: 240V 50Hz Torque: 14.7Nm Number of gears: 2 (Variable Speed) 1st Gear: 480rpm 2nd Gear: 780rpm Protection: Double Insulation Class 2 Coupling Thread: M14 x 2.0 Mixing Paddle Max Diameter: 120mm Weigh: 4.1kg (each)

Replacement Double Vane Pump suit EATON VICKERS VQ Series Our vane pumps are a direct replacement for EATON VICKERS VQ Series Vane Pumps. Not only are they a direct replacement in performance, our pumps are also more cost effective with shorter lead times. Main Features: Direct replacement for all fixed displacement vane pumps (V and VQ Series) Easy to maintain, service and install while still having a compact size. Low noise operation Please Select and Contact us for your specifications from the table below!   Note: Other parts (e.g. shafts, flex plates, seal kits) are available. Please contact us for further enquiries and information.  

Specifications: Type: 63 Reduction: 1:10 Input Flange: B14 71 Input Shaft Size: 14mm Output Shaft size: 25mm Features: IEC Standard Universal Mounting Design Rigid and precise monolithic casing in cast aluminium Cylindrical worm shaft with ground and super-finished involute profile Forced ventilation High quality bearings Low noise and vibration

Specifications: CC/Rev: 397 Rotor Width L1 (mm): 69.4 Speed Max Cont (RPM): 150 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 65 Inlet Pressure Max Cont (Bar): 175 Torque Max Cont (Nm): 380 Weight (kg): 10.3 Cases: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 1.1/4" 14T Splined 24.5mm 14T Splined 35mm 1:10 Tapered

Features: Suits FENNER TIEMAN Hydraulic Power Pack

Features: Suits essentially all pneumatic systems; example: air compressor, air motor systems PT sized standard thread Fitting type: "T", Tee Available in: Ø4mm, Ø6mm, Ø8mm, Ø10mm, Ø12mm Thread sizes from 1/8" to 1/2" External Thread High quality 36 Stainless steel

Specifications:  Power: 22kW (30HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole (1400rpm) Shaft size: Weight: Features: IEC Standard IP55 Protection Rating Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Features: Radial curvature to the jaw face Radial and axial curvature (crowning) to the spider element which provides better torsional softness and an angular misalignmen capability Reliable service for light, medium and heavy duty electrical motor applications Reliable service for light, medium and heavy internal combustion engine power transmission applications

Specifications: Model: 315 L Power Supply: 240V AC 10A Motor Power: 750W Speed: 315 mm/sec (Ramp up/Ramp down Feature) Linear Force: Up to 200kg Duty cycle: 100%  Max Gate leaf Size: 3500 kg

Features: Comes in different motors and pump sizes High quality construction Compatible with SAE and DIN groups

Specifications: Power: 2.2kW (3HP) Voltage: 415 Three Phase 50Hz Speed: 6 Poles (960rpm) Shaft size: 28mm Weight: 33kg Features: IEC Standard IP55 Protecting Rating Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Specification: Power: 0.75kW (1HP) Voltage: 24V DC Amperage/Current: Approx. 42A Speed: 1700rpm Duty: Continous Power: 750 Watt Enclosure: TENV Frame: 80B5 Max. Temperature: 40°C Shaft size: 19mm Features: Epoxy Painted - Black Colour Rolled steel construction Totally Enclosed Non Ventilated Low noise and vibration