Featured Products

Specifications: Power: 0.18kW (0.25HP) Voltage: 415V Three Phase 50Hz Amperage/Current: 0.6A Speed: 4 Pole (1400rpm) Shaft size: 11mm Moutning: B5 Features: IEC Standard Ex Standard IP55 Protection Rating Cast iron construction with top mounted terminal box, high resistance to impact High quality bearings, grease packed for life Low noise and vibration

Features: Cast Iron construction Does not need any lubrication and can work in environments contaminated with oil, dirt, sand, moisture and grease Rubber spider element absorbs shock loading

Features Viton Construction Twin Lip Design Resistance to Chemical and Petroleum Liquids   What's Included  1 x Oil Seal of Size 49x92x10

Specifications: Power Supply: 90V - 240V AC Current: 170 mA Motor Push Force - starting: 30 Kgf Motor Push Force - rated: 17 Kgf Gate Max Length: 100m Manual Override: Lockable with key release Gate Mass (Maximum): 500 Kg Gate Speed (varies with load): 28/22m/min Receiver Frequency: 433 MHz Degree of Protection: IP55 Working Temp: -15°C to +50°C Dimensions: 303mm Wide x 231mm Deep x 432mm High

7 x 1m Nylon Covered Steel Gear Rack for Sliding Slide Gate Features: Nylon Gear Rack with reinforced solid steel bar 7 x 1m length  Suitable for Domestic, Industrial or commercial use Automatic swing gates, sliding gates and garage doors. Kit Includes: 7 x 1m Nylon Covered Steel Gear Rack (7m in total) Optional Extras Extra Remotes Extra Photocells Sensors Install: We can come and install Slide, Swing and Garage Openers Sydney wide

  Specifications:   Power: 11Kw (15HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole Shaft size: 42mm Duty: S1 continuous

Specifications: CC/Rev: 564.9 Rotor Width L1 (mm): 80.2 Speed Max Cont (RPM): 130 Flow Max Cont (LPM): 75 Pressure Drop Max Cont (Bar): 105 Inlet Pressure Max Cont (Bar): 230 Torque Max Cont (Nm): 850 Weigh (kg): 15.5 Case: 1/4" BSPP Shaft sizes available: 1.1/4" Straight keyed (Standard) 32mm Straight keyed 1.1/4" 14T Splined 35mm 1:10 Tapered

Specifications: Power: 0.37kW (0.5HP) Voltage: 240V Single Phase 50Hz Amperage/Current: Approx. 2.81A Speed range: 200-1000rpm Shaft size: 14mm Duty: S1 Mounting: B5 Flange Features: IEC Standard IP55 Protection Rating Capacitor start/Capacitor run Cast aluminium construction with top mounted terminal box Totally Enclosd Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Specifications: CC/Rev: 201.4 Rotor Width L1 (mm): 21.5 Speed Max Cont (RPM): 620 Flow Max Cont (LPM): 125 Pressure Drop Max Cont (Bar): 200 Inlet Pressure Max Cont (Bar): 210 Torque Max Cont (Nm): 590 Weight (kg): 21.5 Case: 1/4" BSPP Shaft sizes available: 40mm Straight keyed (Standard) 1.1/2" Straight keyed 1.1/4" 14T Splined 45mm 1:10 Tapered

Specifications: Code: HO7124 Power Supply (Vac): 230 V Absorption: 1.3 A Power: 280 W Speed: 1.68 m/s Force: 1800 N Torque: 250 Nm Work cycles: 35 cycles/hour Protection Level: IP54 Working Temp: -20°C to +50°C Dimensions: 252mm×180mm×290mm Weight: 9 kg

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in.   Includes (Choose from drop down menu): 75mm x 6mm O-Ring Seal 5pcs     Dimensions How To Measure ID(mm) x Thickness(mm)    eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Specifications: Power: 0.75kW (1HP) Voltage: 415V Three Phase 50Hz Output Speed: 35 rpm Max. Output Torque: 147Nm Output shaft size: 28mm (Hollow Output Shaft) Gearbox size: Type 75 Reduction: 40:1 Service factor: 1.5 f.s. Features: IEC Standard IP55 Protection Rating Class F insulation Low noise and vibration

Features: 200V and 400V Class, 0.4 to 15kW Inverters having dual ratings, heavy and light loading Drive programming function integrated Built-in RS485 MODBUS RTU as standard, other FieldBus optional New current suppressing function 16 programmable speed levels PID control adjusts motor speed automatically to maintain a process variable value Password protection to avoid unexpected parameter change Regeneratie braking unit and braking resistor combination option Protection rating IP20 Manual included

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 25mm x 1mm O-Ring Seal 5pcs OR 25mm x 1.5mm O-Ring Seal 5pcs OR 25mm x 2mm O-Ring Seal 5pcs OR 25mm x 3mm O-Ring Seal 5pcs Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Features: Soft Start/Stop Automatic Safety Reverse System Automatic Courtesty LED Light Electronic Power Stabiliser Rolling Code Technology Permanent Lubricated Motor, Low Vibration and Quiet

  Specifications:   Power: 3Kw (4HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole Shaft size: 28mm Duty: S1 continuous

12V DC 0.37kW 370W 0.5HP 1700rpm Type 63 Motor & Worm Gearbox Drive i60   Specifications: Power: 0.37Kw (0.5HP) Voltage: 12V DC Amperage/Current: Approx. 42A Speed: 1700rpm   Duty: Continuous Power: 370 Watt Enclosure: TENV Frame: 71B14 Max Temperature: 40°C Output Speed: 28.3rpm Max. output torque: 78Nm Output Shaft Size: 25mm (Hollow Output Shaft) Gearbox Size: Type 63 Reduction: 60:1 Service Factor: 1.4 Duty: S1 Features: Epoxy Painted - Black Colour Rolled steel construction Totally Enclosed Non Ventilated Low noise and vibration  Dimensional Drawing:   Suitable Applications:   Hoists / Winches Compressors Conveyor Drives Pump Drives Automation Devices Food / Pharmacy Packaging Pulley drives Fans Food Processing Optional Accessories (Available on request): IEC Flange/Foot Mounting Slide Rails Industrial Gearboxes Couplings Pulleys Chain Drives We also have both Single

Specifications: Power: 3kW (4HP) Max Torque: 13Nm @300rpm Max Speed: 3000rpm Air Consumption: 3620L/min (128cfm) Features: Cast Iron Construction 100% Explosive Proof Reversible Continuous operation in any operation

Specifications: Power: 3kW (4HP) Voltage: 240V Single Phase 50Hz Amperage/Current: Approx. 18.6A Speed: 4 Pole (1400rpm) Shaft size: 28mm Duty: S1 Mounting: B14 Flange Weight: 26kg Features: IEC Standard IP55 Protection Rating Capacitor start/Capacitor run Cast aluminium construction with top mounted terminal box Totally Enclose Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Features: Solid steel bar Fully galvanised Approx. 3mm thick Suitable for Domestic, Industrial or commercial use Automatic swing gates, sliding gates and garage doors Kit Includes: 1 x Selected lengths U-Groove Steel Track