Featured Products

Features: British standard high quality steel construction Induction hardened teeth to improve sprockets resistance to wear Engineered in accordance with the stringent ISO 9000 standards

Specifications: Power: 1.5kW (2HP) Voltage: 240V Single Phase 50Hz Output Speed: 70rpm Max. Output Torque: 170Nm Output Shaft size: 28mm (Hollow Output Shaft) Gearbox size: Type 75 Reduction: 20:1 Service factor: 1.2 f.s. Featues: IEC Standard IP55 Protection Rating Capacitor start/Capacitor run Cast aluminium constructin with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration

Features: 10" Monitor Touch sensor buttons with blue backlit for Talk, Alarm, Monitor and Unlock Wall-mounted Monitor Easy to install with adapter and cables Unlock up to 2 doors (one gate and one other front door) Connect up to 2 alarm systems to trigger recording of cameras Connect up to 2 external cameras SD card expandable storage IP 56 Protection rating Connect up to 4 internal monitors in one house Motion detection camera doorbells (requires SD Card) NEW message recording feature

Specifications: Port sizes available: 3/4", 1" Fluids: Compressed Air Regulator Construction: Piston Body Material: Aluminium Die-cast Bowl Material: Polycarbonate Operating Pressure range: 7.1 psi (0.49 bar) to 140.8 psi (9.7 bar) Filtration: PE: 5µm (Standard) Proof Pressure (Standard Bowl): 213.3 psi (14.7 bar) Max flow rate L/m (ANR): 7490 (3/4"), 8200 (1") Ambient Temperature: -10°C to +60°C Lubricator Oil (Recommended): ISO-VG32 Standard Drain: Semi-Auto Drain (Draings below 7.1 psi (0.49 bar)) Net Weight: 2145g

Features: British standard high quality steel construction Induction hardened teeth to improve sprockets resistance to wear Engineered in accordance with the stringent ISO 9000 standards

Specifications: Bearing unit number: PL-FL204 Shaft diameter: 20mm Dimensions: 113 x 63.5mm Hole span: 90mm Hole size: 11mm Bolt: M10 Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

Specifications: CC/Rev: 245 Rotor Width L1 (mm): 43.5 Speed Max Cont (RPM): 245 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 105 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 348 Weight (kg): 8.2 Case: 7/16"UNF Shaft sizes available: 1" Straight woodruff keyed (Standard) 1" SAE 6B Splined 7/8" 13T Splined 1" 1:8 Tapered

tell me 

Specifications: Max weight wing: 600 kg Motor supply: 230V AC Power: 280 W Thrust: 700 N Lubrication Kind: Grease Thermal cut-out: 140 Working Temperature: -20°C to +70°C Protection Level: IP54 Speed: 10m/min Intermittence work cycle: 35% Height pinion: 99mm

Specifications: CC/Rev: 396 Rotor Width L1 (mm); 53.33 Speed Max Cont (RPM): 150 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 70 Inlet Pressure Max Cont (Bar): 175 Torque Max Cont (Nm): 500 Weight (kg); 8.2 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight Keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Features: Lenght: 300mm (12 Inches) Material: Zinc Plated Type: Non-Square  

Features: Cast iron construction Kit Includes: 1 x 2517 Taper lock bush

Replacement Vane Pump suit EATON VICKERS V Series Our vane pumps are a direct replacement for EATON VICKERS V Series Vane Pumps. Not only are they a direct replacement in performance, our pumps are also more cost effective with shorter lead times. Main Features: Direct replacement for all fixed displacement vane pumps (V and VQ Series) Easy to maintain, service and install while still having a compact size. Low noise operation    

Specifications: Power: 1.1kW (1.5HP) Voltage: 240V Single Phase 50Hz Output Speed: 35 rpm Max. Output torque: 225.1Nm Shaft Size: 35mm (Hollow Output Shaft) Gearbox size: Type 90 Reduction 40:1  Service factor: 1.6 f.s. Features: IEC Standard IP55 Protection Rating Class F insulation Low noise and vibration

  Specifications:   Power: 1.1Kw (1.5HP) Voltage: 415V Three Phase 50Hz Speed: 2 Pole Shaft size: 19mm Duty: S1 continuous

Specification: Type L-AR Duplex

Features: digital display and easy programming Remote control provides rolling code technology, the probability of code duplication is only one of billions Soft Start/Stop, powerful, noiseless Timely resistance detection by computer precise travel positioning Clutch with self-locki function, the door can be locked even in the case of power failure low power consumption, standby power less than 0.5W Automatic courtesy LED light

Single Phase 0.25kW 1/3HP 28rpm Type 50 Electric Motor & Worm Gearbox Drive i100 Single Phase 0.25kW 1/3HP 28rpm Type 50 Electric Motor & Worm Gearbox Drive i100 Specifications: Power: 0.25Kw (0.33HP) Voltage: 240V Single Phase 50Hz Output Speed: 27.7rpm  Max. Output torque: 78Nm Output Shaft size: 20mm (Hollow Output Shaft) Gearbox size: Type 50 Reduction: 100:1 Service factor: 1.3 f.s. Duty: S1 Features: IEC Standard IP55 Protection Rating Epoxy Painted - Silver Colour Capacitor start/Capacitor Run Cast Aluminium construction with top mounted terminal box Class F insulation High Efficiency Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration  Dimensions: Suitable Applications: Hoists / Winches Compressors Conveyor Drives Pump Drives Automation Devices Food / Pharmacy Packaging Pulley drives Fans Food Processing Optional Accessories (Available on request): Output flanges Output shafts Torque Arms Couplings Pulleys Chain Drives We also have both Single and Three Phase electric motors between 0.18Kw to 315Kw in 2, 4, 6 and 8 pole.

Specifications: Power supply (Vac 50 Hz): 230 Absorption (A): 1.1 Power (W): 250 Speed (m/s): 0.34 Force (N): 400 Work cycle (cycles/hour): 35 Protection level (IP): 44 Working temp. ( °C Min/Max): -20 ÷ +50 Dimensions (mm):  191x198x408h Weight (kg): 8

Specifications: Power: 0.37kW (0.5HP) Voltage: 240/415V Three Phase 50Hz Amperage/Current: Approx. 1.1A Speed: 4 Pole (1400rpm) Shaft size: 14mm Duty: S1 Mounting: B3 Foot Weight: 6.4kg Features: IEC Standard IP55 Protection Rating Capacitor Start/Capacitor Run Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration