Featured Products

9 x 1m Nylon Covered Steel Gear Rack for Sliding Slide Gate Upside Down Lugs     Features: Nylon Gear Rack with reinforced solid steel bar with upside down lugs 9 x 1m length  Suitable for Domestic, Industrial or commercial use Automatic swing gates, sliding gates and garage doors. Kit Includes: 9 x 1m Nylon Covered Steel Gear Rack (9m in total) Optional Extras Extra Remotes Extra Photocells Sensors Install: We can come and install Slide, Swing and Garage Openers Sydney wide

Single Phase 5.5KW VSD VFD Variable Speed Frequency Drive Inverter 240V   Main Features: Advanced motor control algorithm High performance open loop vector control Optimal V/F mode Excellent ramp slope control Fast auto-tune (less than 1 minute) Overload: 150% rated output current, 1 minute Low frequency torque: 0.5Hz: 100% rated torque, 1Hz: 150% rated torque Standard configuration 5-digit LED keypad, standard RJ45 Keypad connector Wireless fan block design, easy to replace or maintain

Features: 200V and 400V Class, 0.4 to 15kW Inverters having dual ratings, heavy and light loading Drive programming function integrated Built-in RS485 MODBUS RTU as standard, other FieldBus optional New current suppressing function 16 programmable speed levels PID control adjusts motor speed automatically to maintain a process variable value Password protection to avoid unexpected parameter change Regenerative braking unit and braking resistor combination option Protection rating IP20 Manual included

tell me 

Features: Cast Iron construction Does not need any lubricatin and can work in environments contaminated with oil, dirt, sand, moisture and grease Rubber spider element absorbs shock loading

Specifications: Control Unit: MERAK SL1 Power Supply: 220-230V Motor: 24V DC, 50W Limit Switch: Electromechanical Pinon Module: 4 Slowdown: Yes Locking: Mechanical Release: Lever-operated with personal key Use: Intensive Environmental Conditions: -20 °C to +55 °C IP Rating: IP44 Actuator Weight: 7kg Impact reaction: D-Track

  Specifications:   Power: 7.5Kw (10HP) Voltage: 415V Three Phase 50Hz Speed: 2 Pole Shaft size: 38mm Duty: S1 continuous

Includes: Gliderol Glidermatic GRD Control Board 2 x Gliderol TM390+ Remote

Specifications: Power: 0.37kW (0.5HP) Voltage: 240V Single Phase 50Hz Output Speed: 140rpm Max. Output Torque: 21Nm Output Shaft size: 18mm (Hollow Output Shaft) Gearbox size: Type 40 Reduction: 10:1 Service factor: 2.1 f.s. Features: IEC Standard IP55 Protection Rating Capacitor start/Capacitor run Cast aluminium construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, grease packed for life Low noise and vibration  

Rigid Couplings are used in situations where shaft alignment is essential. A misaligned coupling can cause damage and downtime. When properly fitted this torsionally rigid coupling helps prevent any such event. Rigid Couplings are Taper Lock ready and available in a range of sizes to accommodate almost any shaft size. Rigid Couplings consist of 2 flanges, available in internal and external entry (H & F). This gives two possible coupling assemblies HF and FF. When connecting horizontal shafts, choose the most convenient method. When connecting vertical shafts use assembly FF only. Please message us with the two sizes you require from the list of taper lock sizes below.  11mm 12mm 14mm 16mm 18mm 19mm 20mm 22mm 24mm 25mm 28mm 30mm 32mm 1/2"Inch 5/8"Inch 3/4"Inch 7/8"Inch 1"Inch 1-1/8"Inch 1-1/4"Inch

Features: Compatible with motor sizes: 63-100 Manufactured from galvanized steel Maintain motor alignment Kit Includes: Quick-Mount Motor Mount

Rigid Couplings are used in situations where shaft alignment is essential. A misaligned coupling can cause damage and downtime. When properly fitted this torsionally rigid coupling helps prevent any such event. Rigid Couplings are Taper Lock ready and available in a range of sizes to accommodate almost any shaft size. Rigid Couplings consist of 2 flanges, available in internal and external entry (H & F). This gives two possible coupling assemblies HF and FF. When connecting horizontal shafts, choose the most convenient method. When connecting vertical shafts use assembly FF only. This Coupling does not come with taper bushes. 

Specifications: CC/Rev: 32 Rotor Width L1 (mm): 6.3 Speed Max Cont (RPM): 1250 Flow Max Cont (LPM): 40 Pressure Drop Max Cont (Bar): 125 Inlte Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 52 Weight (kg): 5.5 Case: 7/16" UNF Shaft sizes available: 1" Straight Woodruff keyed (Standard) 1" SAE 6B Splined 7/8" 13T Splined 1" Straight Cross Hole (8mm hole) 1" 1:8 Tapered

Specifications: Type: 90 Reduction: 1:40 Input Flange: B14 80 Input Shaft Size: 19mm Output shaft Size: 35mm Features: IEC Standard Universal Mounting Design Rigid and precise monolithic casing in cast aluminium Cylindrical worm shaft with ground and super-finished involute profile Forced ventilation High quality bearings Low noise and vibration

Features: Suits essentially all pneumatic systems; example: air compressors, air motor systems Fitting type: 'Equal' Union Elbow Available sizes (Outer diameter of tube): Ø4mm, Ø6mm, Ø8mm, Ø10mm, Ø12 Works with PU, PE, PVC and PA tubes Body materials: PBT Seal, O ring material: NBR Maximum pressure: 10 bar Metric sizing

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in.   Includes (Choose from drop down menu): 85mm x 6mm O-Ring Seal 1pc     Dimensions How To Measure ID(mm) x Thickness(mm)    eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)  

O-Rings   MTM Warehouse stocks a large range of Viton O-Rings, O-Rings are an important seal in the manufacturing industry seen in a range of applications from automotive to home appliances. O-Rings specialise in keeping air, dust and fluids from reaching places they can cause damage in. Includes (Choose from drop down menu): 45mm x 1.5mm O-Ring Seal 5pcs OR 45mm x 2mm O-Ring Seal 5pcs OR 45mm x 3mm O-Ring Seal 5pcs Dimensions How To Measure ID(mm) x Thickness(mm) eg. ID(5mm) x Thickness(3mm) OD(mm) = ID(mm) + [2 x Thickness(mm)] 11mm = 5mm + (2 x 3mm)

Technical Specifications: Power Supply: 230V AC 50(60) Hz Absorbed power: 360W Thermal protection on motor winding: 140°C Weight: 500kg Operating ambient temperature: -20°C to +55°C Protection class: IP44 Speed: 12m/min Max gate length: 9m

Features: Colour selection from the colour chart below Australian made from high quality Bluescope Colorbond Steel Kit Includes: Tracks Mounting Brackets Bolts and mounting kit

Includes (Choose from drop down menu): 44mm x 2mm O-Ring Seal 25pcs OR 44mm x 3mm O-Ring Seal 25pcs OR 44mm x 4mm O-Ring Seal 10pcs OR 44mm x 5mm O-Ring Seal 10pcs OR 44.5mm x 3mm O-Ring Seal 25pcs