Featured Products

Specifications: Shaft diameter: 25mm Unit number: UCP205 Dimensions: 140 x 70mm Hole span: 105mm Hole size: 13 x 19mm Weight: 0.82kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-alignment feature that allows the inner and outer rings to have a specific angle Solid construction

Max gate weight (kg) 1400 Max gate length (m) 8 Motor supply (V) 24V DC/230V Max Power Input (W) 250 Speed (m/s) 0.67 Working Temperature (Min/Max) -20 + 50 Protection level IP44 Dimensions (mm) 390x220x320 Weight (kg) 16  

Features: 2 x Sealed Bearing No greasing required Easy adjustments Finish: Zinc Fixing Method: Bolt-on Gap Varianec: 74-86mm Steel Bracket Steel Body Max. gate weight: 450kg Near frictionles movement Kit Includes: 1 x Bolt-on Hinge

Features: Rolling Code Technology (4 billion possible codes) Compatible with ATA PTX 4 remotes 3 Individual Channels Kit Includes: 1 x Receiver (Remotes NOT Included)

  Specifications: Power: 0.75Kw (1HP) Voltage: 240V Single Phase 50Hz Amperage/Current: Approx. 5.22A Speed: 4 Pole (1400rpm) Shaft size: 19mm Frame size: 80 Duty: S1 Weight: 12kg

Specifications: Suits Worm Gearbox: Type 40 Suits Electric Motor: IEC Motor

Specifications: Shaft diameter: 15mm Unit number: UCP202 Dimensions: 127 x 62mm Hole span: 95mm Hole size: 13 x 19mm Weight: 0.69kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

Specifications: CC/Rev: 12.9 Rotor Width L1 (mm): 5.5 Speed Max Cont (RPM): 1550 Flow Max Cont (LPM): 20 Pressure Drop Max Cont (Bar): 105 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 16 Weight (kg): 2.1 Shaft seal: 150 Bar Case: 1/8" BSPP Shaft sizes available: 14mm Straight keyed 16mm Straight Keyed (Standard) 16.5mm 9T Splined

Specifications: Max Weight Wing: 400 kg Max Wing Length: 2m Motor Supply: 24V DC Power: 60 W Thrust: 1500 N Shaft Working Run: 360 mm Thermal cut-out: Working temperature: -20°C to 70°C Protection Level: IP54 Intermittence Work Cycle: 80% Time for 90 Cycles: 15 s

Specifications: See below for spec-sheets with corresponding unit If you are unable to read it, send us a message or call us on (02) 9607 4300 Features: Suitable for machinery systems such as pharmaceutical, food, printing machines, motorcycles, motor pumps, fans air conditioners and many more Self-aligning feature to allow the inner and outer rings to have a specific angle Solid construction

Features: Long life and no need for maintenance Quiet Working noise (Less than 60dB) Low Vibration (Special rubber mounts for feet) Oil free (Air supply is clean and dry) Double filter to ensure clean air Specifications: Voltage: 240V AC 50Hz Power: 1HP (0.75kW) Air Tank: 29L Working Pressure: 8 Bar (116 psi) Displacement: 135 L/min (4.75 cfm)

Featues: LED indicators Durable metal and plastic construction Ergonomic design Battery and instructions included Interchangeable with: FLOR-S FLO1-RS FLO2-RS FLO4-RS NOT Compatible with NICE FLO1,FLO2, FLO4 (as they look identical) Kit Includes: 3 x Remotes (Interchangeable with NICE remotes listed above)

Specifications: Input Voltage: 90 V - 240V AC +/- 10%, 50/60Hz Motor Voltage: 12V DC Motor Power Supply: Battery-Driven, 1.8A Charger Push Force (Max): 250kgf Typical Gate Opening Time: 14.3 Sec Duty Cycle (Mains Present): 50% Daily Operations (Max): 250 Maximim Leaf Width for Corresponding Gate Mass (90° Opening):2.5m = 500kg < 4m>

Specifications: CC/Rev: 326.3 Rotor Width L1 (mm): 37 Speed Max Cont (RPM): 382 Flow Max Cont (LPM): 125 Pressure Drop Max Cont (Bar): 200 Inlet Pressure Max Cont (Bar): 210 Torque Max Cont (Nm): 950 Weight (kg): 23 Case: 9/16" UNF Shaft sizes available: 1.1/2" Straight Keyed (Standard) 40mm Straight keyed 1.1/2" 17T Splined 45mm 1:8 Tapered

Features: Oil tempered steel to provide greater strength Galvanised coating by imersion Black enamel coating for extra protection from rust Will fit most Australian sectional garage doors

Features: Compatible with Opera system for management, programming and diagnostics of automations O-view multi-functional display enables personalisationg, modification, deceleration intervations and divesifcation of parameters such as a force, speed and obstacle detection Kit Includes: 1 x NICE SMC824H MoonClever Control Board unit

Specifications: Shaft diameter: 85mm Unit number: UCF217 Dimensions: 220 x 220mm Hole span: 175 x 175mm Hole size: 23mm Weight: 9.60kg Features: Suitable with machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more. Self-aligning feature to allow the inner and outer rings to have a specific angle Solid construction

  Specifications:   Power: 3kW (4HP) Voltage: 415V Three Phase 50Hz Speed: 6 Pole Shaft size: 38mm Duty: S1 continuous

Specifications:  Shaft diameter: 1 1/4" Unit number: UCP206 Dimensions: 165 x 83mm Hole span: 121mm Hole size: 17 x 21mm Weight: 1.36kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction  

Features: LED indicator Durable metal and plastic construction Sliding button cover Ergonomic design Battery and instructions included Compatible with: TX2 TX4 RDO10 SDO0 SD021 TP/BP SDO-21 MP5 T12/S12 SB12 MPS12 MPS21 DPS D12/20