Featured Products

Specifications: CC/Rev: 123.8 Rotor Width L1 (mm): 16.67 Speed Max Cont (RPM): 486 Flow Max Cont (LPM): 60 Pressure Drop Max Cont (Bar): 140 Inlet Pressure Max Cont (Bar): 175 Torque Max Cont (Nm): 237 Weight (kg): 6.7 Case: 1/4" BSPP Shaft sizes available: 1" Straight keyed (Standard) 25mm Straight keyed 32mm Straight keyed 24.5mm 14T Splined 1.1/4" 14T Splined

Specifications: Bearing unit number: F209-26 Shaft diameter: 1-5/8" Dimensions: 5-13/32" x 5-13/32" (~137.319 x 137.319mm) Hole span: 4-9/64" x 4-9/64" (~105.172 x 105.172mm) Hole size: 5/8" (~15.875mm) Bolt size: 1/2" Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature that allows the inner and outer rings to have a specific angle Solid construction

Features: LED indicators Durable metal and plastic construction Sliding button cover Ergonomic design Battery and instructions included Interchangeable with: 2211L BHT4 Compatible with: BOL4 BOL6 BRD1

Specifications: Shaft diameter: 40mm Unit number: UCF208 Dimensions: 130 x 130mm Hole span: 102 x 102mm Hole size: 16mm Weight: 2.00kg Features: Suitable for machinery systems such as, pharmaceutical, food, printing machines, motorcycles, motors, pumps, fans, air conditioners and many more Self-aligning feature to allow the inner and outer rings to have a specific angle Solid construction

  Specifications:   Power: 3Kw (4HP) Voltage: 415V Three Phase 50Hz Speed: 4 Pole Shaft size: 28mm Duty: S1 continuous

Features: Set screw collars are most effective when used on a shaft made from a material softer then the set screw Dimension in imperial (Metric ones also available)

Features: Protects the garage door from dust, dirt, sand, leaves and water from the top, bottom and sides of your Garage Roller Door. Brush Aluminium Frame and Nylon Bristles Suitable for all Residential Roller Doors Customisable to your Garage Door size

Specifications: Power: 0.37kW (0.5HP) Voltage: 415V Three Phase 50Hz Output Speed: 35rpm Max. Output Torque: 72Nm Output Shaft size: 25mm (Hollow Output Shaft) Gearbox size: Type 63 Reduction: 40:1 Service factor: 2.0 f.s. Features: IEC Standard IP55 Protection Rating Cast aluminiu construction with top mounted terminal box Totally Enclosed Fan Cooled High quality bearings, Grease packed for life Low noise and vibration

Specifications: Power: 0.55kW (0.75HP) Voltage: 415V Three Phase 50Hz Amperage/Current: 1.6A Speed: 4 Pole (1400rpm) Shaft size: 19mm Mounting: B3 Foot Features: IEC Standard Ex Standard IP55 Protection Rating Cast iron construction with top mounted terminal box, high resistance to impact High quality bearings, grease packed for life Low noise and vibration

Rigid Couplings are used in situations where shaft alignment is essential. A misaligned coupling can cause damage and downtime. When properly fitted this torsionally rigid coupling helps prevent any such event. Rigid Couplings are Taper Lock ready and available in a range of sizes to accommodate almost any shaft size. Rigid Couplings consist of 2 flanges, available in internal and external entry (H & F). This gives two possible coupling assemblies HF and FF. When connecting horizontal shafts, choose the most convenient method. When connecting vertical shafts use assembly FF only. Please message us with the two sizes you require from the list of taper lock sizes below.  11mm 12mm 14mm 16mm 18mm 19mm 20mm 22mm 24mm 25mm 28mm 30mm 32mm 1/2"Inch 5/8"Inch 3/4"Inch 7/8"Inch 1"Inch 1-1/8"Inch 1-1/4"Inch

  Specifications:   Power: 3Kw (4HP) Voltage: 415V Three Phase 50Hz Speed: 8 Pole Shaft size: 38mm Duty: S1 continuous

Idler Pulley C Section 9" INCH OD x 1-5/16" INCH Wide   This listing is for one Idler Pulley C Section 9" INCH OD x 1-5/16" INCH Wide   Includes: 1 x Idler Pulley C Section 9" INCH OD x 1-5/16" INCH Wide  

Specifications: CC/Rev: 59.5 Rotor Width L1 (mm): 8.25 Speed Max Cont (RPM): 983 Flow Max Cont (LPM): 50 Pressure Drop Max Cont (Bar): 125 Inlet Pressure Max Cont (Bar): 140 Torque Max Cont (Nm): 89 Weight (kg): 5.7 Case: 7/16" UNF Shaft Sizes avaliable: 1" Straight Woodruff Keyed (Standard) 1" SAE 6B splined 7/8" 13Y Splined 1" Straight Cross Hole (8mm hole) 1" 1:8 Tapered

Vicway Remote Control F-350M/G F350 F380 RFS09B FR46   Features: 4 Buttons 12v (23A) Battery Coding Type: Rolling Durable metal and plastic construction Ergonomic Design Battery included Includes: 1 x Foresee F-350M/G F350 F380 RFS09B FR46 Compatible Remote

Specifications: Voltage: 240V AC 50Hz Power: 3HP (2.2kW) Air Tank: 24L Working Pressure: 8 Bar (116 psi) Displacement: 198 L/min (7 cfm) (highest displacement possible for mobile compressor) Speed: 2850 rpm

Specifications: Port sizes available: 1/4", 3/8', 1/2" Fluids: Compressed Air Regulator Construction: Piston Body Material: Stainless Steel SUS316 Bowl Material: Stainless Steel SUS316 Pressure gauge Material: Case (SUS304), Thread (SUS316) Operating Pressure range: 170 psi (11.7 bar) to 426 psi (29 bar) Filtration/Element Material: PE: 5µm SUS316 Proof Pressure (Standard Bowl): 853 psi (58.8 bar) Max flow rate L/m (ANR): 2080 (1/4"), 2200 (3/8"), 2500 (1/2") Ambient Temperature: -10°C to +70°C Lubricator Oil (Recommended): ISO-VG32 Standard Drain: Semi-Auto Drain (Drains below 7.1 psi (0.49 bar)) Net Weight: 3800g (1/4"), 3870g (3/8"), 3840g (1/2") Mounting Bracket: 2 x Screw

Includes (Choose from drop down menu): 26mm x 1.5mm O-Ring Seal 50pcs OR 26mm x 2mm O-Ring Seal 25pcs OR 26mm x 3mm O-Ring Seal 25pcs OR 26mm x 4mm O-Ring Seal 10pcs

Specifications: Power: 1.5kW (2HP) Voltage: 415V Three Phase 50Hz Output Speed: 35 rpm Max. Output Torque: 307Nm Output shaft size: 35mm (Hollow Output Shaft) Gearbox size: Type 90 Reduction: 40:1 Service factor: 1.2 f.s. Features: IEC Standard IP55 Protection Rating Class F insulation Low noise and vibration

Specifications: Code: TO7024 Power Supply (Vdc): 24 V Absorption: 5 A Power: 120 W Speed: 0.013 m/s Force: 2700N Work cycles: 41 cycles/hour Protection Level: IP44 Working Temp: -20°C to +50°C Dimensions: 1200mm×128mm×150mm Weight: 15kg

Specifications: Power: 0.75kW (1HP) Voltage: 12V DC Amperge/Current: Approx. 83A Speed: 1700rpm Duty: Continuous Power: 750 Watt Enclosure: TENV Frame: 80B5 Max Temperature: 40°C Shaft size: 19mm Features: Epoxy Painted - Back Colour Rolled steel construction Totally Enclosed Non Ventilated Low noise and vibration